Parts Washing

Aqueous Parts Washing Equipment

Automated parts washing systems for industrial parts cleaning

JenFab Cleaning Solutions

Stanley Industries is a proud distributor of JenFab Cleaning Solutions. Since 1993, they’ve supplied the parts washing industry with one of the most complete lines of parts washers and parts cleaning systems. Their comprehensive product line ranges from small-footprint cabinet washers to large, in-line, fully automated conveyor belt, dip agitation and rotary drum washers.

Selecting the Right Aqueous Parts Washing Equipment 

Selecting the right equipment depends on whether your application needs spray wash, immersion, ultra-sonics, rotary drum or inline wash. Our team can help evaluate your needs a choose the best high-performance, precision cleaning system for your specific application.

PCS Series

Image
  • Vertical Pump Systems ~ Reliable and efficient
  • Watlow Heat Elements
  • Industrial Controls ~ Lighted Switches
  • Mechanical Door Seals ~ No rubberized seals that WILL leak!
  • Large Swing-Out Doors for Full Access ~ There is not a more accessible turntable on the market
  • Gear Drive Turntable ~ Over current protection, eliminates slippage associated with friction drive systems
  • Option Ready Shelf ~ Not sure what options you will need? Our machines come ready for simple Plug-N-Play option installation infield
  • Low Water Shut-Off ~ Protect your heat elements from low water conditions
  • Swing away Spray Manifolds ~ For better impingement on smaller parts
  • Bushed stainless steel nozzles.
  • “V” Notched door on 50” and larger machines for easy access to the center of the turntable with an customer supplied overhead hoist system.

ORCA

Image
  • Can handle heavy or light-cleaning.
  • Faster than manual washing – lowers labor costs.
  • Heavy-duty design.
  • Seven-Day Programmable Timer for Heat and Oil Skimmer.
  • Extends life of parts with thorough cleaning.
  • No chains, belts, or tire drives to service or replace.
  • Roll-door and top-loading means small footprint.
  • Forklift access pockets.
  • Auto water-fill.

TL Series

Image
  • Swing Away Top Manifold ~ Top manifold swivels for easy loading/unloading clearance
  • Low Water Shut-Off ~ Protect your heat elements from low water conditions
  • Bushed Stainless Steel V-Jet Nozzles ~ Durability and precise 360 degree cleaning coverage
  • Mechanical Door Seal ~ No rubber seals to replace or leak!
  • Gear Drive Turntable ~ Over current protection, eliminates slippage associated with friction drive systems
  • Strut or Hydraulic Actuated Lid ~ For increased safety and ease of use. TL-42 and larger have hydraulic actuated lids as standard
  • Industrial Control Panel ~ NEMA rated electrical closure featuring IEC components with rotary illuminated cam switches and meets NFPA wiring standards for numbering, sizing, color coding, and overload protection
  • Debris Screen ~ Keeps tanks free of larger debris

AVENGER

Image
  • Small, compact, and portable.
  • Easy to operate – no training required.
  • No belts or drive chains to replace.
  • Built-in fluid strainer extends cleaning solution life of your cleaning solution.
  • Soaking reservoir for small parts.
  • No-mess drip tray.
  • Environmentally sound disposal of oil easy.



Heavy Duty Series (HDS)

Image
  • Vertical Pump Systems which allows working pressures of up to 200 PSI
  • 7 gauge steel construction built for the most severe applications
  • Premium Components & Industrial Controls to support years of trouble-free operation
  • Mechanical Door Seals instead of rubberized seals that often leak
  • Swing-Out V-Notch Doors for Full Turntable Access to make loading big parts safe and easy
  • Swing away Mid-Level Spray Manifolds for better impingement on smaller parts
  • Side Discharge Chip Tray with built-in weir system with Easy to Clean Chip Basket to extend the life of cleaning solution
  • Disc Style Stainless steel Oil Skimmer that efficiently removes oils from cleaning solution
  • Two Function, 24/7 Timer to control heat start/stop and oil skimmer for worry-free operation
  • Upgraded Low Water Shut off & Auto Fill to provide safety and convenience

Vertical Lift Door

Image
  • Jenfab’s Vertical Door Washers were designed for cellular environments or for wash bays that are short on space. This design eliminates swing out doors that can cause problems in tight spaces or present a safety hazard.

  • Vertical Door systems can be manufactured in any size ranging from 25″ to 120″ with a turntable or can be made for use without a turntable.

  • Vertical Door washers without turntables are excellent for a one piece production flow with high volumes. These systems can also include multiple stages for washing, rinsing and drying your parts in a small, compact space.


DIP Agitation Washers

Image
  • Jenfab manufactures standard and custom dip agitation parts washers, so no matter what size your part is, we can design a unit around your needs.

  • Immersion/agitation systems can be designed as stand-alone wash units or integrated together to provide a multi-stage cleaning system.

  • Jenfab immersion agitation systems can include mechanical agitation combined with spray under immersion or air under immersion agitation to enhance the cleaning capabilities.

Inline Cleaning (ICS)

Image
  • By combining both spray under immersion and a jet spray wash, the Incline Cleaning System (ICS) is the perfect machine for small parts cleaning.

  • With the ICS, parts are fed into the front opening where they are washed in a spray under immersion bath before traveling up the conveyor belt to be further spray cleaned. The parts are then rinsed or blown off and exit the back of the system into a container supplied by the end user.

  • When compared to other cleaning technologies, the ICS system is also compact, which means it won’t take up valuable floor space and is ideal for cellular cleaning.
  • If oil control is a consideration for your parts washer,Jenfab offers the perfect solution for your needs. Our optional oil coalescer effectively removes oil from parts while the machine is in operation and extends the life of your cleaning solution by filtering and recycling it back into the system. Or, you may choose aJenfab oil skimmer to remove heavier oils when the machine is not in use.

Rotary Drum

Image
  • JRI Rotary Drum (AUGER) Parts Washers are the most economical method for high volume washing, rinsing, and drying of stamped parts, screw machine parts, small die cast parts etc.
  • Parts are washed by a dual action cleaning process that uses a highly effective spray cleaning, to wash the exterior surfaces, along with immersion cleaning, to flush the inside of the parts under solution.

Belt Washer

Image
  • Jenfab offers several standard models of belt conveyor spray washers sized to meet almost every spray cleaning application. These in-line parts washers use environmentally safe aqueous cleaning solutions for parts cleaning operations to remove chips, oils, coolants and buffing compound from machined parts, plastic parts and stampings.

  • The compact mini belt model is designed for in-line feeding directly from stamping presses and CNC machines and are well suited for automatic loading using pick and place robots. The mid-size belt and large belt models are designed for applications including high-volume appliance and automotive parts washing. A standard conveyor belt cleaning system is offered with cycles for wash, rinse, blow off or dry. More stations are added for additional rinsing, rust inhibiting, phosphate and seal. High efficiency “in tank” maintenance free pumps are used to spray cleaning solution on the parts, and powerful blow off systems remove excess water. Drying systems are available to provide completely dry parts and for spot free drying applications.

Jenfab conveyor washers have design features that allow us to custom tailor the specifications to our customer’s requirements. Zone length, width, height, along with pump size and heat size and type as well as single and multiple lanes can all be tailored to suit the customer’s application.

Lean Clean

Image
  • The LeanClean 360 rotary basket parts washer series combines immersion and spray cleaning with available high tech ultrasonics to meet industrial parts washing requirements as well as critical cleaning and precision cleaning specifications. This ergonomic front loading parts washer cleans parts in baskets or fixtures by rotating, spraying, and spraying under immersion.

  • The cleaning cycle is followed by a combination of spray and immersion rinsing with available ultrasonic rinse, freshwater, and/or DI water rinse. Parts are completely dried in minimal time with Jenfab’s unique energy-efficient dryer design.

Mono-Rail

Image
  • Jenfab manufactures various types of monorail industrial parts washers and metal finishing equipment including machines for pre-treatment, phosphate and ultrasonic cleaning. These systems work well for large parts or multiple small parts.

  • The system operates by moving parts placed on an overhead conveyor through various cleaning or pre-treatment stages, which include spray cleaning, rinsing and spray phosphate stations. Jenfab’s energy efficient dryer also saves money on operating costs by recirculating a high-volume of heated air at low temperature to thoroughly dry even the most complex shaped parts.

  • The overhead conveyor design is also ideal for ultrasonic cleaning of small and large parts. These parts usually pass through a pre-wash spray station prior to entering the ultrasonic cleaning tank. After ultrasonic cleaning, the parts pass through a spray rinse and drying station to complete the process.
  • Closed Loop or Straight Line
  • Immersion
  • Spray
  • Ultrasonic Cleaning
  • Energy Efficient Recirculating Hot Air Convection Dryers
  • Spot Free Drying
  • Maintenance Free In-Tank Seal-Less Pump

Dunnage Washers

Image
  • These Dunnage Washer machines use environmentally safe aqueous solutions to clean tote pans, pallets, dunnage trays and shipping containers of all oils, chips and dirt. Standard machines are offered with various cycles including wash, rinse, blow off or dry. High powered pumps spray clean the parts inside and out.

  • Tote pans or Dunnage trays can be manually or automatically loaded onto the conveyor and powered through the cleaning and drying process. Single lane tote pan washer machines can easily process 200 Tote pans or trays per hour. Standard spray washers are sized to handle most common size tote boxes and dunnage tray and pallets. Dunnage washer machines are sized to process trays up to 96” long x 50” high.

  • Jenfab Dunnage, Tote Pan, and Tote Box washer machines are more energy efficient and can provide savings of thousands of dollars per year. The reason is in the Engineered Spray System which is specifically designed for each application. The amount of spray (gpm) and operating temperature can affect the operating cost by several dollars per hour. Jenfab’s spray washers use only the amount of spray necessary to meet the specified cleaning requirement. These industrial spray washers use environmentally safe aqueous solutions to clean containers of all oils and chips. Standard machines are offered with various cycles including wash, rinse, blow off or dry.

Request a Quote

 

Contact Us

For business inquiries:

deburr@stanley-industries.com

For inquiries over phone:

+1 (216) 475-4000
Image

Cleveland

19120 Cranwood Pkwy
Cleveland, OH 44128

 

Home

Image